Panasonic Announces Technology to Improve CMOS Sensor Sensitivity
Panasonic Corp invented and developed the "micro color splitter," a device that utilizes diffraction of light for color separation.
By using the device for an image sensor, the company enabled to take color images with a high sensitivity. The new method realizes twice as high a sensitivity as traditional color separation methods using color filters.
According to Panasonic's announcement, for image sensors used in digital imaging devices such as digital cameras and camcorders, medical devices and security devices, a color filter is usually attached to each pixel. In the Bayer array, which is the most widely adopted structure, each of the red, green and blue pixels is equipped with a filter that transmits only red, green or blue light, respectively. As a result, 50-70% of the amount of incoming light is lost.
As the resolutions of image sensors used in mobile devices are increasing and their pixel sizes are decreasing, there are increasing demands for higher sensitivities.
Applicable to CCD, CMOS sensors
The newly developed device has three major features. First, with its high light use efficiency, it became possible to take color images that are twice as bright as before.
Second, it can replace the color filters in conventional image sensors regardless of the type of image sensor (CCD sensors, CMOS sensors, etc). Third, the new device can be manufactured by using inorganic materials and processes that are used for the production of existing semiconductor devices.
The application of the micro color splitter to an image sensor was realized by newly developing the following three elemental technologies. They are (1) a wave analysis/optical design technology that calculates the behavior of light wave at a high speed and accuracy, (2) a device technology for realizing the micro color splitter that controls the phase of light passing through a plate-like high-refractivity transparent material and diffracts light in a minute area for color separation and (3) a layout technology and algorithm that reproduce colors with a high sensitivity and resolution based on signals detected by combining color-separated lights in an image sensor.
High speed, accuracy
For the first elemental technology, Panasonic realized a high speed and accuracy at the same time. As a method to analyze light wave, the FDTD (finite-difference time-domain) method is widely adopted, the company said. But with the method, it takes time to analyze light wave, making it difficult to use the method for designing the micro color splitter, which requires a large amount of calculation.
On the other hand, there is a fast analysis method called "Beam Propagation Method (BPM)." But it has a low accuracy and cannot accurately analyze the phenomenon of color separation.
Therefore, Panasonic newly developed a practical optical design technology that realizes a high-speed, high-accuracy analysis. It separates a space into areas that have different optical constants and applies the BPM to each area. As a result, it became possible to accurately express optical phenomena such as reflection, refraction and diffraction.
This technology can be used not only for the micro color splitter but also for optical designs for minute areas.
Manufacturable with common semiconductor processes
(Continue to the next page)