Mitsubishi Demos '3D Touch Panel'

Mar 11, 2009
Tadashi Nezu, Nikkei Electronics
The prototyped "3D touch panel." A white circle is displayed on the area approached by a finger. The circle becomes larger as the finger moves closer to the panel.
The prototyped "3D touch panel." A white circle is displayed on the area approached by a finger. The circle becomes larger as the finger moves closer to the panel.
[Click to enlarge image]
When a finger approaches the panel, icons pop up around it.
When a finger approaches the panel, icons pop up around it.
[Click to enlarge image]
One of the thumbnail pictures enlarges when approached by a finger.
One of the thumbnail pictures enlarges when approached by a finger.
[Click to enlarge image]

Mitsubishi Electric Corp prototyped a capacitive touch panel that can detect the distance between a finger and the panel and demonstrated it at Interaction 2009, which took place from March 5 to 6, 2009, in Tokyo.

Mitsubishi Electric calls the touch panel " 3D touch panel" because it can determine not only the x- and y- (plane) coordinates of a finger but also its z- (normal direction) coordinate. The prototype has a 5.7-inch screen with a resolution of 640 x 480 pixels (VGA).

The prototype is intended for use in mobile devices with a small touch panel. For example, the company envisions mobile devices equipped with a "mouseover function," which changes the image of an icon when the mouse pointer is placed on it.

This time, Mitsubishi Electric had a demonstration of moving a finger toward thumbnail icons and icons on a map and changing their shapes.

"We think the mouseover function is more useful in smaller screens," the company's spokesperson said.

By calculating the time variation of capacity in the z-axis direction, "the acceleration of the finger approaching the panel can be detected," the spokesperson said. With this method, the panel can determine the speed of the approaching finger.

"If the backlight is designed to be red when the finger moves fast and blue when it moves slowly, emotional changes of the user can be reflected on the panel," the spokesperson said.

Switching between two detection methods

The prototype can detect the distance of an approaching finger while using ITO transparent electrodes.

When the finger is not in contact with the panel, the capacitance change is smaller compared with when the finger is in contact with the panel, requiring high detection sensitivity. Copper electrodes would provide a sensitivity high enough to detect an approaching finger, but they are not transparent. But, if transparent electrodes are used, the sensitivity becomes lower than that with copper electrodes because the resistance value of the panel increases.

Therefore, Mitsubishi Electric decided to switch detection methods depending on the position of the finger. When the finger is approaching the panel, it is defined as "proximity state." When the finger is in contact with or very close to the panel, it is "contact state." In the proximity state, priority is given to the sensitivity. And, in the contact state, the resolution is prioritized.

In the proximity state, the panel can detect a capacitance change of about 0.3pF, and about 8 to 19pF in the contact state, according to the company.

The resolution in the x-axis and y-axis directions in the proximity state is equivalent to 10mm. In respect to the z-axis direction, "it is possible to determine the distance of the finger as long as the it is less than 20mm," the spokesperson said. The resolution in the z-axis direction is 256 stages.

In the contact state, the resolution in the x-axis and y-axis directions is equivalent to 0.2mm, the company said.

(Continue to the next page)