InnoDisk Corp has released the EDC 4000 series of embedded disk card and iCF 4000 series of industrial CF card, which enable faster data transfer speed, more stable performance, and better endurance.
With the EDC 4000 and the iCF 4000 series, the data transfer speed can be supported up to 40MB/20MB per second for read/write, claimed to be the best performance for both IDE/ATA and CF interfaces in the industrial embedded system market. This product line aims to prolong the lifetime of Flash chips and to reduce bad blocks at the same time.
The EDC 4000 and the iCF 4000 series was applied with static wear leveling instead of dynamic wear leveling, which enables the Flash chip to perform 4 times longer.
Both series passed the complete and non-stopping power cycling tests for more than 3,000 times, which avoids the possibility of data lost or bad blocks of Flash chips from sudden power disconnection. EDC 4000 and iCF 4000 series contribute to In System Programming architecture (ISP), which helps the firmware to be upgraded more easily.
Nikkei Electronics Asia magazine is available each month free of charge to engineers, managers and other qualified readers.
Nikkei Electronics |
Nikkei Monozukuri |
Nikkei Microdevices |
Nikkei Automotive Technology |
|---|---|---|---|
 |
 |
 |
 |
| The magazine for electronics designers and managers. | Design You Won't Regret - How to Reduce the Risk of Accidents | The most comprehensive technical journal for makers and users of LSIs and LCDs. | The comprehensive automotive technology magazine. |
Copyright © 1995-2009 Nikkei Business Publications, Inc. All rights reserved.
All editorial content and graphics on this Web site may not be reproduced in whole or in part without the express permission of the copyright owner.
November 2009
October 2009
September 2009